Need help?Do you have a question about the Commax HX-1600E and is the answer not in the manual?
General| Video Input | 16 channels |
|---|---|
| Audio Output | 1 channel |
| USB | 2 ports |
| Compression | H.264 |
| Network Interface | RJ-45 |
| Operating Humidity | 10% ~ 90% |
Overview and description of the DVR's front panel controls and indicators.
Identification and purpose of connectors and ports on the DVR's rear panel.
Initial setup process and the first screen displayed upon booting the DVR.
Configuration options for display settings such as OSD, sequence, and channel display.
Settings for recording parameters like resolution, frame rate, quality, and recording mode.
Configuring recording schedules for motion, sensor, or continuous recording.
Settings related to device functions like Alarm Out, PTZ, Motion Zone, and Sensor.
Configuration for alarm output settings, including sensors, motion, and video loss.
Setup for controlling PTZ cameras, including protocol, speed, and ID settings.
Configuring motion detection zones and sensitivity for specific channels.
Instructions for upgrading firmware remotely via network connection.
Remote firmware upgrade process via the web interface.
Configuring DVR IP and router port forwarding for network access.
Accessing the DVR from a remote PC using LAN connection.
Connecting to the DVR via ADSL using DDNS for domain name access.
Steps for accessing the MGATE application and inputting DVR information.
Guide for accessing the DVR from an Android device via the HDEX MGATE app.
Steps for downloading, installing, and registering the HDEX MGATE application.
To Next Page
