Need help?Do you have a question about the Commax CVD-AF04S and is the answer not in the manual?
General| Video Compression | H.264 |
|---|---|
| Hard Drive Support | 1 SATA HDD (Max. 4TB) |
| Audio Output | 1CH |
| USB Ports | 2 |
| Mobile Support | Yes (iOS/Android apps) |
| Power Supply | DC 12V |
| Operating Temperature | -10°C to +55°C |
| Recording Frame Rate | 30fps |
| Network Interface | RJ45 (Ethernet) |
Details the interfaces on the front panel of the DVR.
Details the interfaces on the rear panel for different DVR models.
Explains the functions of each key on the remote controller.
Step-by-step guide for installing the Hard Disk Drive (HDD) into the DVR.
Instructions on connecting a monitor to the DVR for video output.
Guide on connecting the power adapter to the DVR for operation.
Describes the initial system setup screen upon powering on the DVR.
Guides through initial setup steps like homepage, network, and recording schedule.
How to access and use the context-sensitive popup menu for DVR operations.
Adjusting live display, output, private zones, and recording settings.
Configuring recording parameters like channel, record switch, and pre-record options.
Setting the weekly recording schedule for different channels and modes.
Configuring mainstream video resolution, FPS, bitrate, and audio.
Configuring substream video, FPS, and bitrate for network transmission.
Setting up network connection modes (DHCP, Static, PPPOE) and IP addresses.
Configuring email alerts for DVR events, including server and address details.
Setting the schedule for sending email alerts based on event types.
Setting up Dynamic Domain Name System for remote access.
Configuring Real-Time Streaming Protocol for video viewing.
Setting up File Transfer Protocol for uploading captured pictures.
Configuring motion detection sensitivity, area, and alarm actions.
Configuring motion detection sensitivity, area, and alarm actions.
Setting up alarm inputs, types, buzzer, and notifications for events.
Searching event logs by date, time, channel, and record type.
Procedures for backing up records and playing back backup files.
Checking HDD status, space, and performing formatting operations.
Setting up PTZ protocols and configuring cloud storage options like Dropbox.
Setting date, time, language, and other general system parameters.
Configuring NTP time synchronization and Daylight Saving Time.
Managing user accounts, permissions, system information, and logs.
Performing firmware updates, loading defaults, and system maintenance.
Configuring event types, buzzer, and message display for alarms.
Guide for downloading and installing the ActiveX control for web browser access.
Steps to log in to the web interface using username, password, and stream type.
Navigating and understanding the live video monitoring interface.
Using playback controls, video adjustments (chromaticity, brightness, contrast, saturation).
Accessing and viewing recorded video files remotely.
Searching and playing back recorded video files via the web interface.
Using playback controls, record clipping, and downloading recorded files.
Configuring display, record, network, and alarm settings remotely.
Remotely configuring live display and privacy zone settings.
Remotely configuring record parameters, schedule, and mainstream/substream.
Remotely configuring mainstream and substream video parameters.
Configuring network connection types like Static, DHCP, and PPPOE.
Setting up email notifications for DVR events.
Configuring DDNS for remote access and RTSP for streaming.
Setting up FTP for remote file transfer.
Setting up motion detection sensitivity, area, and alarm actions.
Configuring I/O alarm inputs, outputs, and associated actions.
Setting up PTZ protocols, baud rate, and other control parameters.
Setting up cloud storage integration, such as Dropbox.
Configuring system time, date format, language, and video format.
Managing user accounts and permissions remotely.
Performing firmware updates and loading default system settings.
Configuring event types, buzzer, and message display for alarms.
Setting up auto-maintenance features like reboot and system upkeep.
Setting local record paths, download paths, and file types.
Addresses common problems like HDD detection, password issues, and video signal errors.
Guidelines for safely shutting down, cleaning, and maintaining the DVR.
To Next Page
