5.2.4 PTZ and Cloud Storage
1. PTZ
Go to “Main Menu” → “Device” → “PTZ” to get the interface shown as Fig. 5-37.
Fig. 5-37
2. Cloud Storage
Cloud: Cloud Space (Network HDD). It can upload the DVR periodically captured pictures and
motion detection captured pictures to Dropbox
1) Register in Dropbox website, Address: https://www.dropbox.com/
2) Configure network to ensure the normal operation of DVR network.
3) Configure Cloud: Enable Cloud and set the channel and interval for DVR periodically captured
pictures; Enable Motion Detection to get captured pictures for motion detection.
4) Driver Name refers to the name created in the folder of Dropbox and the name can be defined
by the user, e.g. CloudDVR000. The folder is to store the DVR periodically captured pictures)
(See Fig. 5-38).
5) Click [Advanced E-mail Setup] to set the Email box. User shall input his Email. (See Fig. 5-39)
Fig. 5-38 Fig. 5-39
Select a PTZ channel and set PTZ protocol
(Pelco-D, Pelco-P), Baudrate (1200, 2400,
4800, 9600), DataBit（8, 7, 6, 5）, StopBit (1, 2),
Parity (None, Odd, Even Mark Space),
Address and Cruise.
Parameter setting for above channels must be
the same as that of PTZ so that PTZ can be
controlled. The protocol, baudrate and PTZ
address must be set.
To Next Page
Loading...
Need help?
General
