6.3.8 Advanced
Click Advance to unfold its sub-options: Firmware Update, Load default, Events and Maintain.
1. Firmware Update
User may remotely update DVR system, as shown in Fig. 6-32.
Fig. 6-32
Updating procedure: Firstly, select the update file (“.sw”) as Fig. 6-33.
Fig. 6-33
Secondly, click “Start” to start updating. The updating progress can be seen on the screen,
2. Load Default
User may remotely restore default parameters of DVR, with same setting method as that of DVR,
shown as Fig. 6-34.
Fig. 6-34
To Next Page
Loading...
Need help?
General
