Note: If the ActiveX control is not downloaded successfully, please check if your browser’s safety
level or firewall setting is set too high. Please open IE browser → Tools → Internet options →
Security → Internet → Custom Level → Enable the options (Refer to Fig. 6-1-1 and Fig. 6-1-2).
If the web application runs for the first time, please wait for about one minute to finish
downloading.
6.2 Web Application Manager Login
After ActiveX controls installation, please input user name and password, select Main Stream or
Sub Stream (In general, select main stream for intranet and sub stream for outer net), and input
web port number and select language in the interface (See Fig. 6-2). There is an option for
opening all channel preview, select it to open all live pictures. Press Login to log in client and
remotely visit DVR. The default password is blank and administer is authorized to modify the
password. Set password as per introductions of user management in system setting.
After successfully log in, it will enter the real-time monitoring interface and connect video
automatically, as shown in Fig. 6-2.
To Next Page
Loading...
Need help?
General
