4. DDNS
DDNS: After user applies for DDNS service, you could enable <DDNS> function under any one
network type mode (Static, DHCP and PPPoE). And you may remotely visit the NVR through
domain name (http://domain name: Web port No.). When visiting DVR by using DDNS, user
should make sure port and current IP can be normally connected in public network. Details
settings, including server address, host, user, and password, should be consistent with NVR local
setting. Please refer to Fig. 6-21 and Appendix 7-3 for the details.
Fig. 6-21
5. RTSP
Refer to Fig. 6-22. The relevant parameters should be consistent with DVR local setting.
Fig. 6-22
6. FTP
Refer to Fig. 6-23. The relevant parameters should be consistent with DVR local setting.
Fig. 6-23
To Next Page
Loading...
Need help?
General
