To Next PageTo Next Page
Need help?Do you have a question about the Commercial Electric 1002760845 and is the answer not in the manual?
General| Brand | Commercial Electric |
|---|---|
| Model | 1002760845 |
| Category | Work Light |
| Language | English |
Crucial safety instructions and warnings before assembly and installation to prevent hazards.
Details the manufacturer's five-year warranty for defects in materials and workmanship.
Lists conditions and situations not covered by the product warranty, including improper installation or misuse.
Ensure all parts are present and review instructions before starting installation.
Lists necessary tools for installation, including wire strippers, pliers, safety goggles, etc.
Details the items included in the package, such as the fixture body.
Lists all hardware components provided for mounting and installation.
Step-by-step guide on how to detach the power supply box from the LED fixture body.
Instructions for preparing the power supply box, including fitting a bushing and feeding wires.
Procedure for mounting the fixture to drywall using toggle bolts and butterfly nuts.
Instructions for securing the fixture to a wooden surface using hook screws.
Attaching cable sets and mounting chains to the fixture body for hanging.
Hanging the fixture body using chains and hooks, ensuring proper height and wiring feed.
Connecting wires from the fixture to the electrical box, including hot, neutral, ground, and dimming wires.
Steps to restore electrical power and test the fixture after installation.
Instructions for detaching the power supply box from the LED fixture body for surface mounting.
Steps to prepare the power supply box, including removing knock-outs and attaching cable set hooks.
Securing the cover plate to the electrical box using mounting screws, leaving a slight gap.
Mounting the power supply box to the cover plate using keyhole slots and screws.
Connecting the fixture body to the power supply box using cable set hooks and quick connect wires.
Wiring the fixture by connecting hot, neutral, ground, and dimming wires to the electrical box.
Securing the fixture body to the power supply box with screws after wiring.
Restoring power at the electrical panel and turning on the light switch to activate the fixture.
Detaching the power supply box from the LED fixture body for downrod installation.
Preparing the power supply box by removing the center knock-out and attaching cable set hooks.
Installing the rigid pipe and securing the power supply box to it.
Connecting the fixture body to the power supply box using cable set hooks and quick connect wires.
Connecting the fixture's wires to the electrical box, including dimming wires if applicable.
Securing the power supply box to the fixture body using screws after completing electrical connections.
Restoring power and testing the fixture after downrod mounting is complete.
Addresses issues where the fixture does not light, covering power, breaker, and connection checks.
Solves problems related to the fuse blowing or circuit breaker tripping when the light is turned on.
