Commercial Electric 1009 847 951 User Manual

18 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

THANK YOU

USE AND CARE GUIDE

6 ft. / 8 ft. / 10 ft. HIGH VELOCITY

INDOOR/COVERED OUTDOOR CEILING FAN

We appreciate the trust and condence you have placed in Commercial Electric through the purchase of this ceiling fan. We strive to

continually create quality products designed to enhance your home. Visit us online to see our full line of products available for

your home improvement needs. Thank you for choosing Commercial Electric!

1-833-HDFANS-1 / (1-833-433-2671)

HOMEDEPOT.COM

Questions, problems, missing parts? Before returning to the store,

8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST Saturday

call Commercial Electric Customer Service

Visual instruction of how to install this fan:

Visit www.homedepot.com and enter either the Item or Model number to nd

this fan and click the link of visual instruction in the product overview section.

Item #1009 847 953

1009 847 948

Model #AK366-MBK

AK366-TM

10 ft.

6 ft. 8 ft.

Item #1009 847 949

1009 847 952

Model #AK366B-MBK

AK366B-TM

Item #1009 847 950

1009 847 951

Model #AK366A-MBK

AK366A-TM

Table of Contents

Questions and Answers:

A
Amy NixonAug 10, 2025
How to fix a noisy Commercial Electric Fan?
- J
  Jacob FranklinAug 10, 2025
  To reduce fan noise, ensure all motor housing screws are snug and that the screws attaching the fan blades to the motor hub are tight. Also, check that wire nut connections are not rattling against each other or the switch housing's interior wall. Allow the fan a 24-hour 'breaking-in' period, as most noises disappear during this time. If your fan has a ceiling light kit, make sure the glassware is secured tightly and that there is a short distance from the ceiling to the canopy, without it touching the ceiling. Finally, ensure your ceiling box is secure, using rubber isolator pads between the mounting bracket and outlet box.
R
Robert BensonAug 18, 2025
What to do if my Commercial Electric 1009 847 951 Fan won't start?
- A
  Alexis ChoiAug 18, 2025
  If your fan won't start, begin by checking the main and branch circuit fuses or breakers. Then, inspect the line wire connections to the fan and the switch wire connections in the switch housing. Ensure that the frequency switches on both the remote control and receiver are set to the same frequency. Try turning the AC power off, waiting 10 seconds, and then turning it back on. Finally, reset the transmitter by performing the “LEARNING PROCESS”.
C
Christopher CooperAug 25, 2025
Why is my Commercial Electric 1009 847 951 wobbling?
- M
  Mrs. Karla Jackson MDAug 26, 2025
  Fan wobble is often due to loose parts. First, make sure all blades and blade bracket screws are secure. After proper installation, let the ceiling fan run for 10 minutes to self-adjust. If wobbling continues, check the blade level: measure from each blade's center to a point on the ceiling, deviations should be within 1/8 inch. If deviations exceed 1/8 inch, contact Customer Service at 1-833-HDFANS-1 / (1-833-433-2671) to order complimentary replacements of your brackets. If deviations are less than 1/8 inch, call Customer Service to order a complimentary blade balancing kit.
T
Terry JuarezSep 1, 2025
Why does my Commercial Electric 1009 847 951 move backwards and forwards when turned on?
- D
  Danielle TuckerSep 1, 2025
  This start-up movement is normal for DC motor fans. The partial movement is the DC motor aligning the internal magnetic poles for proper operation. This design saves electricity and allows the fan to operate much quieter than standard AC motor fans.

Commercial Electric 1009 847 951 Specifications

General

Brand	Commercial Electric
Model Number	1009 847 951
Type	Ceiling Fan
Number of Blades	5
Reversible Motor	Yes
Fan Blade Material	Wood
Blade Span	52 inches
Blade Material	Wood
Warranty	Lifetime limited warranty

Summary

Safety Information

General Safety Warnings

Key warnings and cautions for installation, safety, and operation.

Installation

Mounting Options and Warnings

Guidance on selecting and preparing the outlet box for fan installation.

Assembly

Assembling the Fan

Detailed steps for assembling the main fan components.

Attaching Mounting Bracket to Electrical Box

Procedure for securing the mounting bracket to the ceiling outlet box.

Hanging Fan on Mounting Bracket

Steps to safely hang the fan motor assembly onto the mounting bracket.

Making Electrical Connections

Guide for connecting fan wiring to household electrical wiring.

Installing the Wall Control

Operation

Wall Control Operating Instructions

Guide to using the buttons on the wall control for fan functions.

Learning Process (Pairing)

Troubleshooting

Fan Will Not Start Troubleshooting

Solutions for issues when the fan fails to power on.

Remote Control Not Working Troubleshooting

Fan Wobble Troubleshooting

Related product manuals

Commercial Electric 1009 847 952

Commercial Electric 1009 847 950

Commercial Electric 1009 847 953

Commercial Electric 1009 847 949

Preview: Commercial Electric SFDC-1050FB

Commercial Electric SFDC-1050FB

Preview: Commercial Electric SFC-225BR-1

Commercial Electric SFC-225BR-1

Preview: Commercial Electric BF42BDCE

Commercial Electric BF42BDCE

Preview: Commercial Electric HVFF16CE

Commercial Electric HVFF16CE

Commercial Electric AK366A-TM

Commercial Electric AK366B-TM

Preview: Commercial Electric AK366B-MBK

Commercial Electric AK366B-MBK

Preview: SFDC6-600CT0-4