To Next PageTo Next Page
Need help?Do you have a question about the Commercial Electric BF42BDCE and is the answer not in the manual?
Instructions on how to safely move the fan between locations using its handles.
Steps to plug in the fan and use the power switch for operation and speed settings.
Instructions on how to safely move the fan between locations using its handles.
Steps to plug in the fan and use the power switch for operation and speed settings.
The Commercial Electric 42 in. Belt Drive Portable Air Circulator, identified by Item # 1002 819 754 and Model # BF42BDCE, is designed to provide powerful air movement for various indoor applications. This fan is shipped fully assembled, ensuring immediate use upon purchase without the need for additional setup or the handling of spare parts. Its primary function is to circulate air efficiently, making it suitable for a range of environments where enhanced airflow is desired.
The core function of this device is to act as a portable air circulator, moving a significant volume of air to improve ventilation, cool spaces, or dry surfaces. It operates using a belt-drive system, which typically allows for quieter operation and potentially greater efficiency compared to direct-drive fans of similar size. The fan is equipped with a 42-inch blade assembly, designed to maximize air displacement.
The fan is powered by a 110-120 Volt A/C electrical supply and features a polarized grounded plug with a 7-1/2 ft. supply cord, ensuring safe electrical connection. A key safety feature is the inclusion of an automatic reset overload device in the motor, which helps prevent overheating and potential damage by automatically resetting if an overload condition occurs. This means the fan may start unexpectedly after an overload, so users are cautioned to avoid placing objects through the grilles into the blade or motor.
The control mechanism for the fan is a toggle switch located on the rear grille. This switch allows users to select between different operational modes: hi, off, and low settings. This variability in speed enables users to adjust the airflow intensity according to their specific needs, whether it's for maximum circulation or a gentler breeze.
The Commercial Electric Air Circulator is designed with portability in mind. It features two handles, strategically placed to facilitate easy movement. Users can grasp either handle and roll the fan to their desired location, making it convenient to reposition the unit as needed within an indoor space. However, a crucial safety warning emphasizes that the fan should not be moved while it is in operation. This ensures user safety and prevents potential damage to the unit or its surroundings.
The fan is strictly intended for indoor use. It is not designed to be exposed to outdoor elements or to become wet, as this could pose electrical hazards and damage the internal components. Furthermore, users are explicitly warned against using the fan to exhaust hazardous chemicals or vapors, highlighting its role as an air circulator for general indoor air quality improvement rather than for specialized ventilation of dangerous substances.
Another important usage guideline pertains to electrical safety: the grounding conductor should not be removed from the plug, and the fan should not be used with an extension cord. These precautions are in place to maintain the integrity of the electrical grounding system and prevent the risk of fire or electric shock. Additionally, the fan should not be used with any solid-state speed control device, as this could interfere with its motor and safety mechanisms.
Proper maintenance is essential to ensure the longevity and safe operation of the Commercial Electric Air Circulator. The primary maintenance task involves cleaning the fan. Users are instructed to always unplug or disconnect the fan from the power supply before performing any servicing or cleaning. This is a critical safety measure to prevent accidental startup or electrical shock.
For cleaning, the grilles can be removed. Once removed, they should be cleaned with a mild detergent. After cleaning, the grilles must be allowed to dry completely before being reinstalled. This process helps to remove dust and debris that can accumulate on the grilles and blades, which can impede airflow and potentially strain the motor. Regular cleaning ensures optimal performance and efficiency of the fan.
The fan's design, with removable grilles, facilitates access to the internal components for cleaning, although detailed instructions for internal cleaning beyond the grilles are not provided in the general maintenance section. The belt-drive system, while potentially offering quieter operation, may require periodic inspection for wear and tear of the belt, though this is not explicitly detailed in the user-level maintenance instructions. The emphasis is on keeping the grilles clean to maintain airflow and prevent motor strain.
In summary, the Commercial Electric 42 in. Belt Drive Portable Air Circulator is a robust, easy-to-use fan designed for effective indoor air movement. Its portability, simple controls, and built-in safety features make it a practical solution for various air circulation needs. Adherence to the provided safety warnings and maintenance guidelines is crucial for ensuring its safe and efficient operation over time.
General| Brand | Commercial Electric |
|---|---|
| Model | BF42BDCE |
| Type | Ceiling Fan |
| Blade Span | 42 in. |
| Number of Blades | 5 |
| Motor Speed | 3 speeds |
| Reversible Motor | Yes |
| Mounting Type | Downrod Mount |
| Finish | Brushed Nickel |
| Blade Material | Wood |
| Light Included | No |
| Indoor/Outdoor Use | Indoor |
| Blade Color Family | Brown |
| Fixture Color Family | Nickel |
| Fan Diameter (in.) | 42 |
| Product Weight (lb.) | 13.2 lb |
