EasyManua.ls Logo

Commercial Electric AK366A-TM - User Manual

Commercial Electric AK366A-TM
18 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
THANK YOU
USE AND CARE GUIDE
6 ft. / 8 ft. / 10 ft. HIGH VELOCITY
INDOOR/COVERED OUTDOOR CEILING FAN
We appreciate the trust and condence you have placed in Commercial Electric through the purchase of this ceiling fan. We strive to
continually create quality products designed to enhance your home. Visit us online to see our full line of products available for
your home improvement needs. Thank you for choosing Commercial Electric!
1-833-HDFANS-1 / (1-833-433-2671)
HOMEDEPOT.COM
Questions, problems, missing parts? Before returning to the store,
8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST Saturday
call Commercial Electric Customer Service
Visual instruction of how to install this fan:
Visit www.homedepot.com and enter either the Item or Model number to nd
this fan and click the link of visual instruction in the product overview section.
Item #1009 847 953
1009 847 948
Model #AK366-MBK
AK366-TM
10 ft.
6 ft. 8 ft.
Item #1009 847 949
1009 847 952
Model #AK366B-MBK
AK366B-TM
Item #1009 847 950
1009 847 951
Model #AK366A-MBK
AK366A-TM

Table of Contents

Questions and Answers

  • D
    David GilbertAug 10, 2025
    How to fix a noisy Commercial Electric Fan?
    • K
      Kristie MosesAug 10, 2025
      To reduce fan noise, ensure all motor housing screws are snug and that the screws attaching the fan blades to the motor hub are tight. Also, check that wire nut connections are not rattling against each other or the switch housing's interior wall. Allow the fan a 24-hour 'breaking-in' period, as most noises disappear during this time. If your fan has a ceiling light kit, make sure the glassware is secured tightly and that there is a short distance from the ceiling to the canopy, without it touching the ceiling. Finally, ensure your ceiling box is secure, using rubber isolator pads between the mounting bracket and outlet box.
  • M
    Martha SchmidtAug 17, 2025
    What to do if my Commercial Electric AK366A-TM won't start?
    • S
      Sarah HarringtonAug 17, 2025
      If your fan won't start, begin by checking the main and branch circuit fuses or breakers. Then, inspect the line wire connections to the fan and the switch wire connections in the switch housing. Ensure that the frequency switches on both the remote control and receiver are set to the same frequency. Try turning the AC power off, waiting 10 seconds, and then turning it back on. Finally, reset the transmitter by performing the “LEARNING PROCESS”.
  • S
    smithcaseyAug 26, 2025
    Why is my Commercial Electric AK366A-TM Fan wobbling?
    • J
      Jessica Sandoval DDSAug 26, 2025
      Fan wobble is often due to loose parts. First, make sure all blades and blade bracket screws are secure. After proper installation, let the ceiling fan run for 10 minutes to self-adjust. If wobbling continues, check the blade level: measure from each blade's center to a point on the ceiling, deviations should be within 1/8 inch. If deviations exceed 1/8 inch, contact Customer Service at 1-833-HDFANS-1 / (1-833-433-2671) to order complimentary replacements of your brackets. If deviations are less than 1/8 inch, call Customer Service to order a complimentary blade balancing kit.
  • R
    reeveschristineSep 2, 2025
    Why does my Commercial Electric AK366A-TM move backwards and forwards when turned on?
    • C
      cruzjadeSep 2, 2025
      This start-up movement is normal for DC motor fans. The partial movement is the DC motor aligning the internal magnetic poles for proper operation. This design saves electricity and allows the fan to operate much quieter than standard AC motor fans.

Summary

Safety Information

Installation Mounting Options

Outlet Box Requirements

Ensures the outlet box is securely mounted and supports a minimum of 50 lb for fan support.

Assembly - Canopy Preparation

Assembling the Fan Components

Assembly - Mounting Bracket Installation

Attaching the Mounting Bracket

Hanging the Fan on Mounting Bracket

Safety Cable Installation

Assembly - Electrical Connections

Making Wire Connections

Connecting fan wires to outlet box and wall control wires.

Assembly - Wall Control Installation

Installing the Wall Control

Wiring and securing the wall control unit and attaching the wall plate.

Assembly - Canopy Installation

Installing the Canopy

Attaching Canopy Bottom Cover

Assembly - Attaching Fan Blades to Arms

Attaching Blades to Blade Arms

Fastening Blade Assemblies to Motor

Assembly - Fastening Blade Assemblies to Motor (cont.)

Fastening Blade Assemblies to Motor (Type B)

Assembly - Installing the Light Cover

Attaching the Light Cover

Assembly - Installing LED Light Kit

Attaching the LED Light Kit

Operation - Wall Control

Wall Control Operating Instructions

Details on using speed buttons, power, reverse, color temperature, and light controls.

Learning Process (Pairing)

Procedure for pairing the wall control with the fan receiver.

Troubleshooting Common Issues

Troubleshooting - Fan Will Not Start

Checks for power, wiring, frequency switches, and transmitter reset.

Troubleshooting - Remote Control Not Working

Checks for wall control compatibility, frequency settings, and transmitter reset.

Troubleshooting - Fan Wobbles

Verifying blade security and performing measurements for balance.

Troubleshooting - Fan Moves Backwards;Forwards

Commercial Electric AK366A-TM Specifications

General IconGeneral
BrandCommercial Electric
ModelAK366A-TM
TypeCeiling Fan
Motor TypeAC
Number of Blades5
Reversible MotorYes
Speeds3
MountingDownrod
Light Kit IncludedYes
FinishMatte Black
Blade MaterialMDF
Indoor/OutdoorIndoor
Blade Span52 inches
Blade ColorWalnut
Light TypeLED
WarrantyLimited Lifetime

Related product manuals