Commercial Electric CE-2701-WH

Other manuals for Commercial Electric CE-2701-WH

Questions and Answers

B
Breanna GarnerAug 11, 2025
Why does my Commercial Electric Controller light stay on continuously?
- J
  Joseph BarreraAug 11, 2025
  The Commercial Electric Controller light may stay on for several reasons: * The motion sensor is in manual mode. To resolve this, turn the light switch that operates the fixture off and back on again within 0.2 to 1.5 seconds. * A lamp is positioned too close to the motion sensor or pointed at nearby objects that cause heat to trigger the motion sensor. Try repositioning the lamp away from the motion sensor or nearby objects. * The motion sensor may be picking up a heat source like an air vent, dryer vent, or brightly painted, heat-reflective surface. Reposition the motion sensor. * The light fixture is on the same circuit as a motor, transformer, or fluorescent bulb. Install the light fixture on a circuit without motors, transformers, or fluorescent bulbs.
D
Dr. Ronald KrauseAug 16, 2025
What to do if my Commercial Electric Controller light comes on for no apparent reason?
- A
  Andrew StevensAug 17, 2025
  If your Commercial Electric Controller light comes on for no apparent reason, it could be due to a couple of factors: * The motion sensor may be sensing small animals or automobile traffic. Try re-aiming the motion sensor. * The HI-LO switch is set to Dusk-to-Dawn or Dusk Timer mode. In these modes, the light fixture is operating normally.
P
Penny DrakeAug 22, 2025
Why is my Commercial Electric Controller light flickering or not coming on?
- A
  Andrew ShafferAug 22, 2025
  If your Commercial Electric Controller light keeps flickering or does not come on, it may be because: * The bulbs are not dimmable. Turn the HI-LO knob to the OFF position. * The dimmable bulb is incompatible with the HI-LO feature. Replace it with a compatible dimmable bulb or connect an extra, compatible dimmable bulb in parallel.
S
Sharon ParkAug 29, 2025
What to do if my Commercial Electric Controller lights turn off too late in Dusk-to-Dawn setting?
- E
  elizabethchambersAug 29, 2025
  If the Commercial Electric Controller lights turn off too late in Dusk-to-Dawn setting, it may be because the light fixture is installed in a relatively dark location. Reset the light level (LUX) at which the sensor operates with the Dusk Learn button. This will allow you to reset the outside light level at which the motion sensor becomes active and the HI-LO feature operates.
D
daisy78Sep 3, 2025
Why are my Commercial Electric Controller lights flashing on and off?
- S
  Sabrina PooleSep 3, 2025
  If your Commercial Electric Controller lights are flashing on and off, it could be due to the following reasons: * Heat or light from the lamp head may be turning the motion sensor on and off. Try repositioning the lamp head away from the motion sensor. * Heat is being reflected from other objects and may be turning the motion sensor on and off. Reposition the motion sensor. * The motion sensor is in 'TEST' mode and warming up. Flashing is normal under these conditions.

Commercial Electric CE-2701-WH Specifications

General

Brand	Commercial Electric
Model	CE-2701-WH
Color	White
Connectivity	Wi-Fi
Mobile App	Yes (Commercial Electric App)
Voice Control	Yes
Display	No
Power Source	Hardwired
Voltage	120VAC
Wattage	300W Incandescent/150W LED/CFL
Dimmable	Yes
Compatible Bulb Type	LED, Incandescent, CFL
Mounting Type	Wall Mount
Switch Type	Rocker

Related product manuals

Commercial Electric CE-2701

12 pages

Commercial Electric CE-2701-WH - User Manual

Table of Contents

Other manuals for Commercial Electric CE-2701-WH

Questions and Answers

Commercial Electric CE-2701-WH Specifications

Related product manuals