Need help?Do you have a question about the Commercial Electric MB-50901 and is the answer not in the manual?
General| Brand | Commercial Electric |
|---|---|
| Model | MB-50901 |
| Category | Racks & Stands |
| Language | English |
Ensures component attachment supports three times equipment weight to prevent injury or damage.
Observe safety measures and use proper gear during installation to prevent physical injury.
Avoid installing on structures prone to vibration, movement, or impact to prevent display or surface damage.
Avoid installing near heat sources like heaters or fireplaces to prevent display damage or fire risk.
Use only with indicated maximum weights; exceeding them may cause collapse, instability, or injury.
Details the screws, anchors, washers, and spacers provided for mounting the TV bracket.
Lists the main components of the TV mount kit, including mounting plate and brackets.
Guide to selecting the correct screw diameter (M6/M8) based on TV mounting hole compatibility.
Determine proper screw length using a pencil and mark to match TV hole depth, avoiding damage.
Secure mounting brackets to the TV back using identified screws, washers, and spacers.
Select a suitable wall location considering access, environment, and structural integrity for safe mounting.
Examine wall surface for stability, check for wiring/pipes, and use appropriate drill bits for mounting.
Calculate and mark the correct height for the wall plate based on TV size and desired viewing height.
Steps for drilling pilot holes, inserting anchors, and attaching the mounting plate to concrete or masonry.
Steps for locating wood studs, drilling pilot holes, and attaching the mounting plate using lag bolts.
Slide TV brackets onto the wall plate and secure them with screws, requiring assistance for heavy TVs.
To Next Page
