To Next PageTo Next Page
Need help?Do you have a question about the Commercial Electric XD2616-L and is the answer not in the manual?
General| Brand | Commercial Electric |
|---|---|
| Model | XD2616-L |
| Category | Racks & Stands |
| Language | English |
Key safety warnings and cautions for product usage and installation, including weight limits and forbidden uses.
Details the conditions and circumstances under which the product warranty is not applicable.
Verify TV VESA size and weight compatibility with the wall mount before installation.
Compare package contents with the hardware and parts list; contact customer service for missing items.
Guidelines for choosing a suitable wall, emphasizing weight-bearing capacity and accessibility.
Recommendations for positioning the TV at comfortable viewing eye levels, both seated and standing.
Ensuring wall integrity, avoiding hazards, and adhering to specific requirements for wood, concrete, and brick walls.
Detailed list of all hardware components included with the TV wall mount system.
Overview of the main components included in the package, showing parts A through F.
Guide to selecting the correct bolt diameter for TV mounting holes by testing M4, M6, and M8 bolts.
Method for determining the correct bolt length using a pencil and measuring hole depth, with caution for curved/recessed TVs.
Instructions on how to attach the TV brackets using appropriate bolts, washers, and spacers, with a caution against overtightening.
Using the template and bubble level to mark accurate hole locations on the wall for the wall plate unit.
Steps for drilling mounting holes in concrete or brick walls, including anchor insertion.
Procedure for drilling mounting holes into wood studs using a stud finder and appropriate drill bit.
Aligning the wall plate with pre-drilled holes and securing it to the wall using lag bolts and washers.
Instructions for hanging the TV onto the wall plate and securing it with bolts, emphasizing the need for two people.
How to adjust the TV's tilt and swivel angles using specific screws after initial mounting.
Guidance on organizing TV cables neatly using the provided velcro ties.
Solutions for cables being blocked by the mount or brackets, including using spacers.
Troubleshooting steps to correct a TV that is tilting, by adjusting rear plate bolts.
How to adjust bracket position to prevent them from being visible from behind the TV.
Steps to ensure the TV and wall plate are level, adjusting leveling bolts as needed.
Guidance on how to lubricate the arm's joints to resolve stiffness.
Advice for when bolts are difficult to screw into wood studs, including pre-drilling and wrench usage.
Solutions for bolts being too long for TV mounting holes, involving spacers and washers.
