4
Positioning the LED portable task light
Position Description
1 Stand upright.
2
Stick onto adsorption platform using the embedded magnets and
adhesive backed mounting strips (B).
3 Hang on the wall using a suspension string (not included).
4 Move freely in any hand-held position.
THANK YOU
the purchase of this LED portable task light. We strive to continually create quality products
designed to enhance your home. Visit us online to see our full line of products available for
your home improvement needs. Thank you for choosing Commercial Electric!
Safety Information
Carefully read and understand the information in this manual before you operate this LED
portable task light. Failure to do so could lead to a malfunction of the product or personal
injury.
CAUTION: Do not stare directly into the LED portable task light when it is turned
on as the LED portable task light is designed to have a high brightness mode.
CAUTION: Do not puncture, damage or dismantle the LED portable task light,
and replace battery.
CAUTION:
corrosive and/or explosive gas, and chemical, medical and electronic devices,
including magnetized data devices; hot steaming areas, as damage can occur.
CAUTION: Use the micro USB charging cable provided in the package with an
appropriate DC5V 1A charger.
CAUTION: The battery works on between 32°F (0°C) to 113°F (45°C), working
outside the temperature may cause malfunction.
CAUTION: Do not use the LED portable task light when it is charging.
CAUTION: Avoid dropping the LED portable task light as damage to the PC cover
or other electronic components can occur.
CAUTION: Handle the oxidized aluminum casing with care.
CAUTION: Test the adhesive backed mounting strips on the adsorption platform
before applying to avoid damage to the adsorption platform.
CAUTION: Use the adhesive backed mounting strips to protect surfaces from
potential scratches from the magnet on the LED portable task light.
CAUTION: Do not apply the adhesive backed mounting strips in humid locations
as the adhesive backed mounting strips contain iron.
WARNING:
the party responsible for compliance could void the user’s authority to operate
the equipment.
NOTICE: Prolonged usage of the LED portable task light may increase the temperature of
the LED portable task light to 122°F. This is normal and will not cause damage to the LED
portable task light or hurt the user.
NOTICE:
a normal sign and is part of the software control.
NOTICE: Always follow the good practice of charging the LED task light which contains
Lithium Ion battery to its full capacity before operation or prolonged storage. To maintain
the proper functionality of the LED task light, it is recommended to charge it once every
three months.
NOTICE:
(1) This device may not cause harmful interference, And
(2) This device must accept any interference received, including the interference that
may cause undesired operation.
following conditions:
NOTICE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
□ Reorient or relocate the receiving antenna.
□ Increase the separation between the equipment and receiver.
□ Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
□
□
□
□
□
□
□
□
□
Consult the dealer or an experienced radio/TV technician for help.
Limited Warranty
The manufacturer warrants this product to be free from defects in materials and
workmanship for a period of one (1) year from date of purchase. This warranty applies
only to the original consumer purchaser and only to products used in normal use and
service. If this product is found to be defective, the manufacturer’s only obligation, and
your exclusive remedy, is the repair or replacement of the product at the manufacturer’s
discretion, provided that the product has not been damaged through misuse, abuse,
to any product that is found to have been improperly set-up or used in any way not in
accordance with the instructions supplied with the product. This warranty shall not apply
to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration,
or faulty installation, or any other failure not relating to faulty material workmanship. The
or incidental loss or damage, including labor/expense costs involved in the replacement or
repair of said product.
Contact the Customer Service Team at 1-877-527-0313 or visit www.HomeDepot.com.
SPECIFICATIONS
Body 8.5 in. (215 mm) handheld tube with Oxidized
Aluminum, PC, ABS end cap with embedded magnet
casing
LED 23 pcs, 6000 k – 6500 k
Wattage 3.8 W, Max.
Beam angle 110°
Adhesive Backed
Mounting Strips
1.77 in. (45 mm) x 1.77 in. (45 mm)
Micro USB Charging
Cable
11.8 in. (300 mm) micro USB charging cable (Max. 1A)
Li-ion battery (embed-
ded in tube) full-cycle recharges
Charger (not included) DC5V 1A
SKU 1002141580
UPC 8419011000015
1
Charging the LED portable task light
The low power orange indicator light illuminates when the battery is less than
10% charged.
Connect the micro USB charging cable (C) to the micro USB charger port on LED
portable task light using an appropriate DC5V 1A charger.
The recharging status indicator light is red during charging.
LED portable task light turns green when fully charged.
USB cable