Picture 3: Camera LCD Shows
5. Confirm your need of Upgrade
5.1 Confirm the content of Picture 2 and Picture 3, click [Next Step]. The
current and updated firmware version will appear at lower left corner of your
screen (picture 4)
5.2 Confirm [Current Version], click [Next Step]
Notice: If it appears like Picture 5, there’s no need of your upgrading. Please
stop the USB connection and click [Finish] by prompt of upgrading. Turn off the
camera’s power, take out battery or battery adapter, restart your camera.
Picture 4 Need
Upgrading
Picture 5 No Need Upgrading
To Next Page
Loading...
