Commlite CM-ENF-E1 PRO - User Manual

Commlite Lens Mount Adapter from Nikon F Lens to Sony E-Mount
CM-ENF-E1 PRO Firmware Upgrading Instruction
Upgrading Content
The Newest Firmware: Ver. 06 _2016.09.28
（
Windows Only
）
Notice:
Upgrade CM-ENF-E1 PRO from Ver.05 to Ver.06
Upgrading Details：
V06 Firmware Upgrading Content:
1. Compatible with SONY A9;
2.Compatible with following new lens:
AF-S 24-70mm f/2.8E ED VR
AF-S 70-200mm f2.8E FL ED VR
AF-S 105mm f/1.4E
85MM f/1.4 ART
135mm f/1.8 ART
Notice
：
V06 version lens list(it is quite possible working with the adapter which
is not including in the table, but we can't guarantee its compatibility and
performance.
Notice Before Upgrade
1. Make sure whether your lens need to be upgraded (check the current
version first), and pay attention to our newest version NO;
2. Following the below steps to confirm your current version. Don’t need to
upgrade if the current version confirmed to be the newest version already;
3. Be sure you have connected the adapter to Camera and lens before
upgrading;
4. While in upgrading the 'MAC' Firmware, if it shows 'file damaged', please
enter into setting of 'safety and privacy' and choose 'Any source' option to
make your computer accept the file first;

Summary

Windows Firmware Upgrade Guide

Pre-Upgrade Notices for Windows

Important notices and warnings to follow before starting the upgrade on Windows.

Check Current Firmware Version (Windows)

Procedure to verify the adapter's current firmware version using the camera.

Windows System Requirements

Specifies supported Windows OS, software, and system resource needs.

Download and Launch Updater

Steps to download the firmware file and start the updater application.

Configure USB Connection for Windows

Setting the camera's USB connection mode to 'Mass Storage'.

Connect Camera and Computer

Connecting the camera, adapter, and computer via USB cable.

Confirm Upgrade Necessity

Verifying if the firmware requires an update based on the current version.

Perform Data Transfer and Upgrade

Transferring firmware data and running the upgrade process.

Verify Firmware Update

Checking the lens' firmware version to confirm successful update.

Mac OS Firmware Upgrade Guide

Check Current Firmware Version (Mac OS)

Procedure to verify the adapter's current firmware version using the camera.

Mac OS System Requirements

Details supported Mac OS, CPU, disk space, and software requirements.

Power and USB Cable Requirements

Emphasizes using a fully charged battery and original USB cable for Mac OS.

Disable Computer Sleep Mode

Advises turning off the computer's sleeping mode before upgrading on Mac.

Download and Launch Updater (Mac OS)

Steps to download the firmware DMG file and start the updater for Mac.

Configure USB Connection for Mac OS

Setting the camera's USB connection to 'Mass Storage' for Mac OS.

Connect Camera and Computer

Connecting the camera, adapter, and computer via USB cable for Mac OS.

Confirm Upgrade Necessity

Verifying if the firmware requires an update based on the current version.

Perform Data Transfer and Upgrade

Transferring firmware data and running the upgrade process on Mac.

Verify Firmware Update (Mac OS)

Checking the lens' firmware version to confirm successful update on Mac.

Commlite CM-ENF-E1 PRO Specifications

General

Type	Lens Adapter
Lens Mount	Nikon F
Material	Metal
Aperture Control	Yes
Electronic Contacts	Yes
Filter Thread	No
Autofocus	Yes
Tripod Socket	Yes
Firmware Upgrade	Via USB port
Compatibility	Nikon F-mount lenses to Sony E-mount cameras
Camera Mount	Sony E