1. Press [Menu] ---- Enter into [Setting] ----- Choose [Version]
2. Camera will show the current Lens (ENF-E1 adapter) Version
If using QX Series Camera, one can check the version via executed upgrading
software.
◆ Firmware upgrade preparation
Before download the upgrading files, prepare the following works excepting
the
camera.
1. Operation Software
【
Mac OS
】
Supported software: Mac OS X v.10.5–10.10
2. Other Software Requirement
CPU: Intel Processor
Not support Core Solo and Core Duo Processor
Hard Disk Space: 200MB or more
Internal Storage: 512MB or More
Make sure to turn off the other application routines before firmware upgrade
To Next Page
Loading...
