1. Operation Software
【Windows 】
Supported Software
：
Windows 10 / Windows 8.1 / Windows 8 / Windows 7
SP1 / Windows Vista*1 SP2
(Don’t support *1 Starter edition)
2. Other Software Requirement
Hard disk space: 200MB or More
Internal Storage: 512MB or More
Notice: Please turn off all the application programs before upgrading
3. Other Requirement
3.1 Power
Full charge of Battery NP-FW50
Note: One can operate only when the battery power is over than 3 grids, we
recommend the full-power battery.
3.2 Original USB Cable
Note: We don’t assure one can successfully upgrade with the USB cable
bought from the-third party manufacturer
◆ Firmware Upgrade
--Please use the full-charged battery or battery adapter before upgrading;
--Please don’t take out the battery or interrupt the power during firmware
upgrading, otherwise it may cause your camera’s damage permanently;
--Please take out the memory card before upgrading
1. Download the upgrading file
To Next Page
Loading...
