INCLUDE FILES
LISTINGS
janus.[hi]:
gives interface to janus.library. All definitions in this file are
amiga specific. The most useful thing in this file are the
definitions for janus memory allocation types
janusreg.[hi]:
hardware constants. Most people should not need this. If you
do, we need to hide more information.
janusvar.[hi]:
the shared data structure between the amiga and the pc. Once
again, you should not need direct access to these routines. We
have tried to provide interface routines to do all the normal
things.
i86block.i:
command blocks for calling pc's interrupt's directly and for the
hard disk.
sewices.[hi]:
hard coded constants for interrupt numbers. Eventually these
numbers will be
gotten at run time, but for now they are
constants. These numbers correspond to the "jintnum"
parameters below.
setupsig.[hi]:
data structure for SetupJanusSig(
)
call.
i86block.i
-
interface definitions between amiga and
commodore-pc
Copyright
O
1986, Commodore-Amiga Inc., All rights reserved
IFND JANUS-186BLOCKI
JANUS-186BLOCKI SET
1
;
All registers in this section are arranged to be read and written
;
from the WordAccessOfTset area of the shared memory. If you really
;
need to use the ByteAccessArea, all the words will need to be byte
;
swapped.
To Next Page
Loading...
