Commodore Amiga A500 - Page 230

0-low level l -high level
REST-RESET
ITRPT/STNPINTERRUPT/STANDARD
Note 1 : You have the option to write data into the bit*. However,
this data is treated as
0 internally. In addition, the bit* is al-
ways read as
0.
Note 2: You can write 1 into the IRQ FLAG bit and 0 or 1 into the
BUSY bit. They are not executed, but can be read.
Note 3: It is possible to read and write all bits other than bit* and
BUSY bit. However, only
0 can be written into IRQ FLAG.
More information on the clocWcalendar may be found in the OK1
MSM6242RS Direct Bus Connected-Type Real Time Clock app.
notes.