Section
3.3
Software for Amiga Expansion
This section contains listings and information on the following
expansion software commands:
EXPANSION.LIBRARY1
NAME
ADDDOSNODE
AddDosNode
-
mount a disk to the system
SYNOPSIS
ok
=
AddDosNode( bootPri, flags, deviceNode
)
DO DO
D1
A0
FUNCTION
This routine makes sure that your disk device (or a device that wants
to be treated as if
it
was a disk
...)
will be entered into the system.
If
the dos is already
up
and running, then
it
will be entered immediate-
ly. If the dos has not yet been run then the data will be recorded, and
the dos will get
it
later.
To Next Page
Loading...
