Taken from an Email by Peter Kittel, forwarded by Olivier Cremel.
CDTV Keyboard Connector
1 Ground
2 I / O Keyboard data
3 (I)/ O Keyboard clock
4 +5V DC
5 Unused
To modify the CDTV keyboard to connect to the CD32...
Cut the plastic pin from the connector.●
Open the case.●
Find the connector where the cable is located.●
Switch leads 1-4 and 2-3.●
Close the case.●
Taken from a posting by Paul van der Heu.
... A500 keyboard connector ...
1 black Keyboard clock
2 brown Keyboard data
3 red Res
4 orange +5V DC
5 yellow Unused
6 green Ground
7 blue Power LED
8 violet Disk LED
Connect like this...
A500 CD32
1 -> 5
2 -> 1
4 -> 4
6 -> 3
Taken from an Email by Kimmo Veijalainen.
...A1000 keyboard connector
file:///C|/sites/amigaemulation/cd32/CD32FAQ/CD32_FAQ_2000.htm (36 of 39) [3/9/2000 1:55:14 PM]
To Next Page
Loading...
