Commodore PC - Page 126

54 MS-DOS User's Reference
■ If the CS:IP is 0000:100H, exe2bin assumes that the file will
run as a .com file with the location pointer set at 100H by the
assembler statement ORG (the first 100H bytes of the file are i j
deleted). No segment fixups are allowed, since .com files must ^-^
be segment relocatable; that is, they must assume the entry
conditions explained in the Microsoft Macro Assemblei manu- .
als (User's Guide and Reference Manual). Once the conversion U
is complete, you may rename the output file with a .com
extension. The command processor will then be able to load
and execute the program in the same way as the .com pro
grams supplied on your msdos disk.