Commodore PC - Page 360

1288 Appendix E MS-DOS Message Directory
Formatting while copying k^J
[Diskcopy]
■ Diskcopy displays this message if the target disk has never
been formatted LJ
General failure reading (or writing) drive x:
[MS-DOS] ; \
■ This is a device error. See Appendix D, "Disk and Device v_y
Errors."
Graftabl needs DOS version 2.0 or later (j
[Graftabl]
■ You cannot use Graftabl with l.xx versions ofMS-DOS.
Graphics characters already loaded ^
[Graftabl]
■ The Graftabl command displays this message if you have
already loaded the table of graphics characters into memory. {^J
Graphics characters loaded
[Graftabl] t)
■ The Graftabl command displays this message after it loads the ^^
table of graphics characters into memory.
H Has invalid cluster, file truncated {^mJ
[Chkdsk]
■ The file directory entry contains an invalid pointer to the data
area If you specified the li switch, the file is truncated to a [^J
zero-length file.
Head: hhh Cylinder: ccc , ,
[Format] >-*'
■ Format displays the head and cylinder number of the track
currently being formatted
I Illegal device name
[Mode]
■ Your computer does not recognize this device name. i \
Incompatible system size
[Sys]
■ The system files occupy more space on the source disk than is K^J
available on the target disk
You cannot use the sys command to transfer the system files to
this disk. '\^J
u