Commodore Plus 4 - Page 17

H
The
Left
Side
Of
Your
PLUS/4
~~
n
The socket and the switch on the left side of the Plus/4 are both used
for TV connections. Neither is used if you're connecting your Plus/4 to
a monitor.
3 The RF Jack
This is where you plug in one end of the RF cable (the thin black
cable). You can plug either end into this jack and the other end into the
TVswitchbox.
4 The High/Low Switch
This
switch controls which channel is used for Plus/4 video output. Set
the H/L switch to L for output on channel 3. Set the H/L switch to H for
video on channel 4.
You can use either channel 3 or 4 on your TV to display the video pic
ture from your computer. If you have a channel 3 TV station in your
area, select channel 4, and vice versa. Experiment to see which setting
gives you the best picture.
The
Back
of
Your
Computer
m
H
■i