Commodore Plus 4 - Page 197

-
is recommended in using the GO command. To return to TEDMON
after executing a machine language program, use the BRK instruction.
EXAMPLE. G140C
Execution begins at location S140C.
COMMAND: H (HUNT)
PURPOSE. Hunt through memory within a specified range for all
occurrences of a set of bytes.
SYNTAX: H <address 1> <address2> <data>
oddress 1 > beginning address of hunt procedure
oddress 2> ending address of hunt procedure
<data> data set to search for data may be hexadecimal or an
ASCII string. An ASCII is specified by preceding the first character with
a single quote, eg, 'STRING. Data may be single or multiple element
argument. When multiple and in hexadecimal each number must be
separated by a space.
EXAMPLE HCOOOFFFF'READ
HA000A101 A9FF4C
Search for
ASCII string
READing from
COOOtoFFFF
Search for data $A9,
Sff, S4C, fromA100
toA101
COMMAND: L (LOAD)
PURPOSE: Load a file from cassette or disk.
SYNTAX: L <"fi!ename">, <device>
■■.filename"-■ is any legal Plus/4 filename inside quotes.
<device> is a hexadecimal number indicating the device to load from.
1 is cassette
188