2 | Amplified Loudspeaker Controller Install and User Guide
Important Safety Instructions
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
This unit has been engineered and manufactured to ensure your
personal safety. But IMPROPER USE CAN RESULT IN POTENTIAL
ELECTRICAL SHOCK OR FIRE HAZARD.
In order not to defeat the safeguards incorporated into this
product, observe the following basic rules for its installation, use
and service. Please read these “Important Safeguards” carefully
before use.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this equipment near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus that produce heat.
• Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding-type plug has two blades
and a third grounding prong. The wide blade or the third prong
are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the
obsolete outlet.
• Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
• Only use attachments/accessories specified by the
manufacturer.
• Use only with the rack, cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.
• Unplug this apparatus during lightning storms or when
unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
• The apparatus shall be connected to a MAINS socket outlet
with a protective earth grounding connection
• Where the MAINS plug or an appropriate coupler is used as the
disconnect device, the disconnect device shall remain readily
operable.
THE TRIANGLE WITH THE LIGHTNING BOLT IS USED TO ALERT THE USER TO
THE RISK OF ELECTRIC SHOCK.
THE TRIANGLE WITH THE EXCLAMATION POINT IS USED TO ALERT THE
USER TO IMPORTANT OPERATING OR MAINTENANCE INSTRUCTIONS.
THE CE-MARK INDICATES THE COMPLIANCE WITH THE LOW VOLTAGE AND
ELECTROMAGNETIC COMPATIBILITY.
SYMBOL FOR EARTH/GROUND CONNECTION.
SYMBOL INDICATING THAT THE EQUIPMENT IS FOR INDOOR USE ONLY.
SYMBOL FOR CONFORMITY WITH DIRECTIVE 2012/19/EC OF THE
EUROPEAN PARLIAMENT ON WASTE ELECTRICAL AND ELECTRONIC
EQUIPMENT (WEEE).
DO NOT USE THE UNIT AT ALTITUDES ABOVE 2000 M.
DO NOT USE THE UNIT IN TROPICAL ENVIRONMENT.
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT ATTEMPT
TO OPEN ANY PART OF THE UNIT. NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CONNECTION TO THE MAINS SHALL BE DONE ONLY BY A ELECTRO-
TECHNICAL SKILLED PERSON ACCORDING THE NATIONAL REQUIREMENTS
OF THE COUNTRIES WHERE THE UNIT IS SOLD.
DO NOT USE THIS ALC IF THE ELECTRICAL POWER CORD IS FRAYED OR
BROKEN.
TO AVOID ELECTRICAL SHOCK, DO NOT TOUCH ANY EXPOSED SPEAKER
WIRING WHILE THE ALC IS OPERATING.
DO NOT SPILL WATER OR OTHER LIQUIDS INTO OR ON THE ALC.
NO NAKED FLAME SOURCES SUCH AS LIGHTED CANDLES SHOULD BE
PLACED ON THE ALC.
WARNING TO PREVENT INJURY, THIS APPARATUS MUST BE SECURELY
ATTACHED TO THE FLOOR/WALL IN ACCORDANCE WITH THE INSTALLATION
INSTRUCTIONS.
THIS DEVICE MUST BE POWERED EXCLUSIVELY BY EARTH CONNECTED
MAINS SOCKETS IN ELECTRICAL NETWORKS COMPLIANT TO THE IEC 364
OR SIMILAR RULES
DISCONNECT THE AC MAINS SOURCE BEFORE ATTEMPTING TO CLEAN ANY
PART OF THE ALC
COMMUNITY SUGGESTS PLUGGING THE ALC-3202D TO A 16 A RATING, C OR
D CURVE, 10 KA SECTIONING BREAKER.
IT IS HIGHLY RECOMMENDED TO UNPLUG THE OUTPUT CONNECTORS
BEFORE PROCEEDING WITH THE SELF CHECK PROCEDURE
THE TESTING SIGNALS MIGHT CAUSE LOUDSPEAKER IMPAIRMENTS.
OUTPUT TERMINALS ARE HAZARDOUS: WIRING CONNECTION TO THESE
TERMINALS REQUIRES INSTALLATION BY AN INSTRUCTED PERSON AND
THE USE OF READY MADE LEADS.
PROPERLY FIT THE AC MAINS PLUG TO THE ALC INLET.
BEFORE POWERING THIS ALC, VERIFY THAT THE CORRECT VOLTAGE RATING
IS BEING USED.
VERIFY THAT YOUR MAINS CONNECTION IS CAPABLE OF SATISFYING THE
POWER RATINGS OF THE DEVICE.
TAKE CARE TO LOCK THE OUTPUT TERMINAL BEFORE SWITCHING THE
DEVICE ON.
IMPORTANT: The manufacturer cannot be held responsible
for damages caused to persons, things or data due to an
improper or missing ground connection.
Contact the authorized service center for ordinary and
extraordinary maintenance.
It is absolutely necessary to verify these fundamental
requirements of safety and, in case of doubt, require an
accurate check by qualified personnel.
Note: Every eort has been made to ensure that the
information contained in this manual was complete and
accurate at the time of printing. However, due to ongoing
technical advances, changes or modifications may have
occurred that are not covered in this manual. The latest
version is available at communitypro.com.
EN
To Next Page
Loading...
Need help?
General
