11
Safety Measures
9.1 General warnings
Before performing any type of maintenance work, the following indications
should be taken into consideration:
• Always turn off the machine using the 3 position switch (15).
• If a blockage occurs, please contact your sales representative.
• Disconnect the machine from the power supply.
In the event of a breakdown or malfunction, turn the machine off. Do not
try to repair it or intervene directly. Please call your local technical service.
Note: Failure to respect this warning could endanger the safety of
both the machine and user.
9.2. Regular maintenance
To guarantee the efficiency and correct operation of the grinder, it is es-
sential to follow manufacturer instructions and ensure that all maintenance
work is carried out by qualified staff. Regular, monthly programmed inspec-
tions are recommended of the parts subject to wear and tear. Systemati-
cally check the usage level of the burrs. The perfect condition of the burrs
guarantees an even grind of the coffee and optimum quality of the product
served. It also reduces electrical consumption and the risk of the motor and
burrs overheating.
Note: Based on extensive experience and a medium-hard coffee
blend, we recommend replacing the burrs on the K-10 Conic Fresh after
grinding 1500 Kg/3300 Lbs of coffee and on the K-8 Fresh after grinding
400 Kg/880 Lbs of coffee.
10
Maintenance
Note: manufacturer cannot accept responsibility for any damage
caused by improper use of the machine or failure to respect the safety
measures indicated below.
Users are asked to pay careful attention to the following indications:
Additional safety elements incorpated into our grinder models:
• Hand protector located in the doser in order to avoid ngers acciden-
tally getting caught in the grinding burrs
• Special xing screw to hold the hopper in place
• The coffee grinder should only be used for grinding coffee beans.
• Do not use the machine to grind other types of foods such as nuts,
dried fruits or to fine-grind granulated foods such as sugar, etc.
• The appliance is not to be used by children or persons with reduced
physical, sensory or mental capacities, or lack of experience and knowled-
ge, unless they have been given supervision or instruction.
• Any other use of the machine will be considered improper and dan-
gerous.
• Do not allow liquids to come into contact with the internal or external
surfaces of the machine at any time, except for those parts that have
been expressly referred to in the “CLEANING” section. If, for any reason,
this should occur, immediately disconnect the machine from the power
supply and dry all surfaces carefully. Should it be necessary to access the
internal parts of the machine, where the electrical components are loca-
ted, take the machine to your local technical service.
• In the event of any broken components or intervention, we recom-
mend that you contact your local technical service, who will repair or
replace the part, guaranteeing the maintenance of the safety standards.
• Replacement of the main power cable of any grinder model should
only be done by an authorized supplier.
i
i
i
i
ORIGINAL INSTRUCTIONS
To Next Page
Loading...
Need help?
General