Compaq 1610 - Page 97

Tips and Troubleshooting 10-11
Writer: Shelly Ficalora Saved by: J Abercrombie Saved date: 01/08/98 10:31 AM
Part Number: 266667-001 File name: 14Ch10.doc
Solving Communication Problems
Infrared Problems
Problem Possible Cause Solution
Can’t transfer files
using the IR port.
The IR devices are not
set up properly.
Set up the devices
properly. See Chapter 7,
“Using the Infrared
Feature,” for setup
guidelines.
The sending or receiving
device is not configured
properly for IR.
Configure each device
for IR according to the
manufacturer’s
instructions. For
additional information,
see “Connecting With
an Infrared Port” in the
Windows CE Services
Help
that you installed
on your computer.
The receiving device is
not compatible with the
sending device.
Transfer files another
way (such as through the
auto-sync cable or via a
PC Card).
Can’t transfer more
than one file at a time
using the IR port.
The handheld PC is
designed to transfer one
file (or 25 Contact cards)
at a time when sending
data to another device.
Transfer only the
recommended number of
files at one time.