1-6 English
Writer: M. Silvetti Saved by: Marianne Silvetti Saved date: 06/24/98 3:26 PM
Pages: 14 Words: 2536 Template: c:\msoffice\templates\working\comm.dot
File Name Ch1_en.doc Part Number 307716-002
USB Connectors
The base of the monitor has two Universal Serial Bus (USB)
connectors. Use USB connector
❶
to connect the USB signal
cable to the computer. Use connector
❷
to connect USB
compatible plug and play devices such as a keyboard, mouse, or
joystick if supported by your computer. This feature provides
USB pass-through and does not support USB host requirements.
CAUTION:
This USB connector is not designed for use with high
speed USB devices such as a video camera, scanner, etc. Compaq
recommends connecting high speed devices directly to the computer.
✎
These USB connectors operate as a pass-through system. Your
computer must have a USB host controller installed for any
USB-connected devices to operate.
CAUTION:
To prevent deterioration of signal transfer or malfunction of
USB devices, USB cables should not exceed 9.75 feet (2.95 meters) in
length. This specific length includes both the USB upstream cable and the
USB downstream cable.
To Next Page
Loading...
