Finding Information, Updates, and Help 3-3
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Karen Williams Saved by: Integrity Group Saved date: 05/30/00 1:00 PM
Part Number: 168894-001 File name: cH03.doc
Downloading Software Updates
You can obtain download software updates and installation
instructions from the Download page at the Compaq website. In
addition, each download includes a Readme.txt file that includes
installation instructions and other information.
NOTE:
Most software at the Compaq website is packaged in a
compressed file called a
SoftPaq.
A compressed file containing
system read only memory (ROM) is called a
ROMPaq
.
To download software updates from the Compaq website
—
1. Go to http://www.compaq.com/support/files.
2. From the Downloadables menu, select Portables.
3. Select your computer family, model, and operating system,
then select Locate Software.
4. Browse through the entries and ensure that you have the latest
software, especially the ROM and video updates.
NOTE:
To determine the version of the system ROM installed
on the computer, press
Fn+Esc.
The version of the Compaq
System BIOS is the version of your system ROM. If you are
unable to display the system ROM version with
Fn+Esc,
refer
to “Using Computer Setup” in Chapter 4 of this guide.
5. Download any updates that are later than those currently on
your computer.
NOTE:
If you are downloading a ROMPaq, you will need a
formatted 1.44-megabyte or larger diskette and either a
diskette drive or an Imation SuperDisk LS-120 drive. A
ROMPaq can be installed from a diskette inserted into either
a diskette drive or a SuperDisk LS-120 drive, but cannot be
installed from a SuperDisk LS-120 disk.
Installing Software Updates
Installing a Downloaded SoftPaq
1. Open and read the Readme.txt file included with the
download.
2. Follow the installation instructions in the Readme.txt file or
on the Compaq website.
To Next Page
Loading...
