Keyboard and Pointing Device 3-9
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Jennifer Hale Saved by: Jennifer Hale Saved date: 10/07/98 5:33 PM
Part Number: 387792-001 File name: ch03.doc
Initiating QuickLock/QuickBlank
IMPORTANT:
Before QuickLock/QuickBlank can be initiated, a
power-on password must be established and QuickLock/
QuickBlank must be enabled through Computer Setup.
Press the
Fn+F6
hotkeys to initiate QuickLock/QuickBlank at any
time and from within any application. This hotkey
■
Disables the keyboard and the pointing device.
■
Clears the display.
To reenable the keyboard and return your information to the
screen, enter your power-on password.
Accessing Power Management
Press the
Fn+F7
hotkeys to access Power Management. This
hotkey lets you customize the level of battery conservation, or use
one of the three preset conservation levels.
Use the left or right arrow keys to select a different level.
Accessing the Battery Gauge
Press the
Fn+F8
hotkeys to show the status of the battery packs.
Three numbered boxes indicate the status of each installed battery:
■
Battery 1—primary battery in the computer battery bay
■
Battery 2—battery in the MultiBay of the expansion base or
the battery charging bay of the convenience base
■
Battery 3—battery in the half-height bay (with MultiBay
Adapter) of the expansion base
Press the right or down arrow key to view the status of the next
battery pack. If a battery pack is not in a bay, the corresponding
bay cannot be selected. Press the left or up arrow key to select the
previous battery pack.
To Next Page
Loading...
