Compaq Armada e500 Software Installation Guide

Installing Microsoft Windows NT Workstation 4.0 on Compaq Armada E700, M700, E500, M300, and V300 9
13L1-1000B-WWEN
Appendix B
Docking for the First Time
Before docking, you need to ensure that all of the specific drivers and support software for your
specific Armada have been installed. Please refer to “Installation of Compaq Drivers and
Enhancements” for the list of deliverables and instructions on how to install them.
Compaq strongly recommends a “cold dock” for the user’s first docking under Microsoft
Windows NT Workstation 4.0. Properly shut down the computer by clicking Start
→
Shut Down.
Select Shut down the computer? and click Yes. If the system requires to be manually turned off,
do so now. Place the computer in the docking station or convenience base and turn on the unit’s
power.

Compaq Armada e500 Specifications

General

Processor	Intel Pentium III
Optical Drive	CD-ROM or DVD-ROM
Network	10/100 Ethernet
Processor Speed	500 MHz
RAM	64 MB
Display	14.1-inch TFT
Resolution	1024 x 768
Storage	6 GB
Graphics	ATI Rage Mobility with 8 MB video memory
Operating System	Windows 98
Weight	2.9 kg (6.4 lbs)
Battery Life	Up to 3 hours
Ports	2 USB, serial, parallel, VGA, PS/2, infrared, audio in/out
Wireless	Optional 802.11b