To Next PageTo Next Page
Need help?Do you have a question about the Compaq CRT Monitor s7500 and is the answer not in the manual?
Special components important for safety are marked and must be replaced with specified parts.
Guidelines for servicing involving high voltage and shock risks, including isolation transformers.
Explains X-radiation source, measurement, and prevention by maintaining factory high voltage levels.
Procedure to measure and adjust high voltage to 25.5kV, ensuring safety.
Detailed steps for factory mode adjustments using PC software, including EEPROM clearing and presets.
Procedure for adjusting white balance, luminance, and color parameters using a meter and PC.
Diagnostic steps for when the monitor fails to power on.
Steps to diagnose issues when no characters are displayed on the screen.
Troubleshooting steps for when no image raster is visible on the screen.
Diagnostic procedure for horizontal deflection failure, identifying potential faulty components.
Steps to diagnose and fix horizontal linearity issues, referencing a signal table.
Procedure to diagnose and resolve problems with vertical deflection.
Steps to diagnose and fix issues related to the On-Screen Display functionality.
Diagnosing Display Power Management (DPM) failures and checking LED indicators.
General
