12 www.hp.com Desktop Management Guide
Desktop Management Guide
5. As soon as the computer is turned on, press and hold the F10 key
until you enter Computer Setup. Press
Enter to bypass the title
screen, if necessary.
✎
If you do not press the F10 key at the appropriate time, you must
restart the computer and press and hold the
F10 key again to access
the utility.
If you are using a PS/2 keyboard, you may see a Keyboard Error
message—disregard it.
6. If you are using a a diskette, insert it now.
7. Click File > Replicated Setup > Save to Removable Media.
Follow the instructions on the screen to create the configuration
diskette or USB flash media device.
8. Download a BIOS utility for replicating setup (repset.exe) and
copy it onto the configuration diskette or USB flash media device.
To obtain this utility, go to
http://welcome.hp.com/support/files
and enter the model number of the computer.
9. On the configuration diskette or USB flash media device, create
an autoexec.bat file containing the following command:
repset.exe
10. Turn off the computer to be configured. Insert the configuration
diskette or USB flash media device and turn the computer on. The
configuration utility will run automatically.
11. Restart the computer when the configuration is complete.
To Next Page
Loading...
Need help?
General
