14 www.hp.com Computer Setup (F10) Utility Guide
Computer Setup (F10) Utility
Security
(continued)
System IDs Allows you to set:
• Asset tag (18-byte identifier) and
ownership Tag (80-byte identifier
displayed during POST).
See the Desktop Management Guide on
the Documentation CD for more
information.
• Chassis serial number or Universal Unique
Identifier (UUID) number. The UUID can
only be updated if the current chassis
serial number is invalid. (These ID
numbers are normally set in the factory
and are used to uniquely identify the
system.)
• Keyboard locale setting (for example,
English or German) for System ID entry.
DriveLock Security Allows you to assign or modify a master or
user password for MultiBay hard drives. When
this feature is enabled, the user is prompted to
provide one of the DriveLock passwords during
POST. If neither is successfully entered, the
hard drive will remain inaccessible until one of
the passwords is successfully provided during
a subsequent cold-boot sequence.
✎
This selection will only appear when at
least one MultiBay drive that supports the
DriveLock feature is attached to the
system.
See the Desktop Management Guide on the
Documentation CD for more information.
Computer Setup (Continued)
Heading Option Description
✎
Support for specific Computer Setup options may vary depending on the hardware
configuration.
To Next Page
Loading...
