Compaq dc5100 - Microtower PC - Advanced System Settings; Power-On Options

18 www.hp.com Computer Setup (F10) Utility Guide
Computer Setup (F10) Utility
Advanced* Power-On Options Allows you to set:
• POST mode (QuickBoot, FullBoot, or
FullBoot every 1–30 days).
• POST messages (enable/disable).
• F9 prompt (enable/disable). Enabling
this feature will display the text “F9 = Boot
Menu” during POST. Disabling this feature
prevents the text from being displayed.
However, pressing the F9 key will still
access the Shortcut Boot [Order] Menu
screen. See Storage > Boot Order for
more information.
• F10 prompt (enable/disable). Enabling
this feature will display the text
“F10 = Setup” during POST. Disabling
this feature prevents the text from being
displayed. However, pressing the F10 key
will still access the Setup screen.
• F12 prompt (enable/disable). Enabling
this feature will display the text
“F12 = Network Service Boot” during
POST. Disabling this feature prevents the
text from being displayed. However,
pressing the F12 key will still force the
system to attempt booting from the
network.
*For advanced
users only.
Computer Setup (Continued)
Heading Option Description
✎
Support for specific Computer Setup options may vary depending on the hardware
configuration.