Compaq nc2400 - Notebook PC User Manual

Initiating or resuming from standby
Task Procedure Result
Initiate standby.
●
With the computer on, press fn+f3.
●
Select Start > Turn Off Computer > Stand
by*.
In Windows XP Professional, if Stand by is
not displayed:
a. Click the down arrow.
b. Select Stand by from the list.
c. Click OK.
●
The power lights blink.
●
The screen clears.
Allow the system to initiate
standby.
No action required.
●
If the computer is running on battery power,
the system initiates standby after 10 minutes
of computer inactivity (default setting).
●
If the computer is plugged into external
power, the system initiates standby after 25
minutes of computer inactivity (default
setting).
NOTE Power settings and timeouts
can be changed using Power Options in
Windows Control Panel.
●
The power lights blink.
●
The screen clears.
Resume from user-initiated
or system-initiated standby.
Press the power button.
●
The power lights are turned on.
●
Your work returns to the screen.
*If you have been registered to a network domain, the button you click will be called Shut Down instead of Turn Off
Computer.
ENWW Initiating or resuming from standby 11

Compaq nc2400 - Notebook PC Specifications

General

Brand	Compaq
Model	nc2400 - Notebook PC
Category	Laptop
Language	English