10 REPLACING THE HARD DRIVE
VI. Checking To See If the Replacement Part Is Installed Properly
1. Reconnect all peripheral devices to the computer.
2. Turn on the computer by pressing the Power button.
3. Run the QuickRestore CD (follow the instructions provided with the CD).
Note: You do not need to return the QuickRestore CD when returning your defective hard drive.
4. If the problem persists, repeat the Removing and Replacing procedures.
5. If you are still experiencing problems, contact Compaq Support: 1-800-984-9350.
VII. Returning the Defective Part
Please refer to the Compaq Part Return Instructions that came with your replacement part for instructions on
returning the defective part.
To Next Page
Loading...
