Compaq Presario 5070 User Manual

Compaq.com - Compaq Presario Maintenance and Service Guide - 5200 Series
United States December 10, 2002
Maintenance and Service Guide
Compaq Presario 5000, 5100, and 5200 Series Computers
Models: 5070, 5184, 5201, 5206, 5221, 5240
Product
Description
Troubleshooting
Illustrated Parts
Catalog
Removal &
Replacement
Procedures
Jumper & Switch
Information
Specifications
See the Notice for copyright and trademark information, and the Preface for symbol
conventions and Technician Notes.
Download ZIP file of complete MSG to hard drive.
This MSG will be periodically maintained and updated as needed.
To report a technical problem, contact your Regional Support Center or IM Help Center.
For content comments or questions, contact the
Editor.
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/5000/index.html [12/10/2002 9:27:43 AM]

Compaq Presario 5070 Specifications

General

Processor Speed	500 MHz
RAM	64 MB
Maximum RAM	512 MB
RAM Slots	2
Operating System	Windows 98
Power Supply	200W
Optical Drive	CD-ROM
Graphics	Integrated
Sound	Integrated
Ports	USB, Serial, Parallel
Expansion Slots	PCI
Network	Ethernet

Summary

Product Description

CPU Rear Connectors

Identifies and describes the various ports and connectors on the back of the computer.

Troubleshooting

Clearing CMOS

Procedure to reset the system's CMOS settings, often to clear passwords.

Power-On Self Test (POST)

Explains POST error messages, their probable causes, and recommended actions.

Configuration

Guide to using Setup utility for hardware configuration and troubleshooting.

Diagnostic Error Codes

Lists diagnostic error codes, descriptions, and steps to resolve them.

Troubleshooting Without Diagnostics

Provides simple checks and solutions for common computer problems without diagnostic utilities.

Removal & Replacement Procedures

Electrostatic Discharge

Explains ESD hazards and precautions for handling computer components safely.

Preparation for Disassembly

Outlines essential steps to prepare the computer before starting removal or replacement procedures.

Hood

Mass Storage Devices

Memory Module (DIMM)

Processor

Procedure for removing and replacing the computer's processor.

Jumper & Switch Information

System Boards

Details jumper settings and connector information for system boards across different models.

Hard Drives

Specifications

System Specifications

Covers general system dimensions, power requirements, environmental factors, and IRQ assignments.

Power Supply

Details input/output specifications, safety standards, and environmental ratings for the power supply.

Hard drives