English 1-5
Writer: M. Silvetti Saved by: Marianne Silvetti Saved date: 06/24/98 4:36 PM
Pages: 14 Words: 2440 Template: c:\msoffice\templates\working\comm.dot
File Name BCH1_EN.doc Part Number 308012-001
USB Connectors
The base of the monitor has two Universal Serial Bus (USB)
connectors. Use connector
❶
to connect the USB signal cable
to the computer. Use connector
❷
to connect USB compatible
plug and play devices such as a keyboard, mouse, or joystick if
supported by your computer. This feature provides USB pass-
through and does not support USB host requirements.
CAUTION:
This USB connector is not designed for use with high
speed USB devices such as a video camera, scanner, etc. Compaq
recommends connecting high speed devices directly to the computer.
✎
These USB connectors operate as a pass-through system. Your
computer must have a USB host controller installed for any
USB-connected devices to operate.
CAUTION:
To prevent deterioration of signal transfer or malfunction of
USB devices, USB cables should not exceed the combined length of 9.75
feet (3.0 meters).This length includes both the USB signal cable and the
USB peripheral cable.
To Next Page
Loading...
Need help?
General
