1-6 English
Part Number: 325803-002- Writer: Bruce Sullivan- Saved by: Bruce Sullivan
Pages: 13 Words: 2463 Saved date: 09/03/99 10:45 AM File Name:SonHogan
✎
The degauss selection does not have a menu. When you select
degauss, the monitor corrects color impurities on the screen
without bringing up another menu. Color impurities are usually
caused by moving or rotating the monitor or by external mag-
netic fields. The monitor screen automatically degausses when
the monitor is turned on. After the degauss selection has been
used, there is a 20-minute delay until the degauss circuitry is
restored and the degauss function can be used at full strength
again.
Making Adjustments Using the OSD
To make a selection from the on-screen display:
1. Press the
Select
button
1
on the monitor front panel to display
the Main Menu on the monitor screen.
Monitor with On-Screen Display
✎
The bar on the bottom of the OSD menu shows the current
operating resolution.
2. To make a selection from the Main Menu, press the
Minus
(
−
)
button
2
located on the monitor front panel to scroll down, or
press the
Plus
(
+
) button
➌
to reverse or scroll up.
To Next Page
Loading...
Need help?
General
