E
16
item 01 902
Note:
It always has a large number of gas & impurity adsorbed on the
surface of alcohol tester, when first time taking out the tester from
the packaging, or after long time no using for the tester, it need
more time for cleaning and warm up the sensor, you should
repress the power button and retry several times if possible.
Test
1. The "Blow" symbol is displayed when warm-up is succeed, and
the 10 to 00 countdown is started that indicate the tester is in
testing mode.
2. Blow into the breath inhaler for 3-5 seconds with normal power
after a deep inhalation..
3. Read the test result from the alcohol tester LCD.
4. The "Caution" symbol is displayed if the alcohol concentration is
the level:
• 0,020 % BAC to 0,050 % BAC
• 0,200 ‰ BAC to 0,500 % BAC
• 0,100 mg/l to 0,250 mg/l
To Next Page
Loading...
