22
The battery capacity is low. Charge the device.
The skin turns red or the skin
feels irritated
The adhesive surface of the
pads is dirty or dry.
Wipe the adhesive surface of pads gently with a wet fingertip.
The therapy time is too
long or the intensity is set
too high.
Reduce the application time or reduce the intensity.
The electrode pad surface is
worn out.
Replace electrode pad.
No power source; no display
on LCD.
The battery capacity is
depleted.
Charge the device.
Power cuts off during use The battery is weak. Charge the device.
The cord is broken. Replace the cord.
It is difficult to attach the pad
to the skin
Have you removed the trans-
parent film from the pad?
Peel off film on the adhesive surface of pads.
To Next Page
Loading...