Compool Pool or Spa Control System CP-1000 - Remote Controls; Spa-Side Remote

REMOTE CON'TROLS
SPA-SIDE REMOTE:
One or more 3-function waterproof Remote Controls (called SLIPERSWITCH) may be located at your spa. This
will enable you to override the CP-1000 Controller, and activate your spa equipment from the convenience of the
spa. It is possible to control the following equipment from the Superswitch:
1. FILTER. Activates filter pump and enables spa heater.
(Overrides FILTER Equipment Button at CP-1000).
2. HEAT BOOST. Overrides the thermostat, and activates the heater for a 5 minute period.
If the filter pump is not running, this button will be inactive.
3. AUX
1. Activates auxiliary equipment such as spa light.
(Overrides AUX 1 Equipment Button at CP-1000).
4. AUX 2. Activates auxiliary equipment such as a fountain.
(Overrides AUX
2 Equipment Button at CP-1000).
5. AUX 3. Activates auxiliary equipment such as jet pump or waterfall.
(Overrides AUX 3 Equipment Button at CP-1000).
6. AUX 4. Activates auxiliary equipment such as landscape lights.
(Overrides AUX
4 Equipment Button at CP-1000).
7. AUX 5. Activates auxiliary equipment such an air blower.
AUX
5 cannot be controlled from the CP-1000.
8. AUX 6. Activates auxiliary equipment such as an additional jet pump.
AUX
6 cannot be controlled from the CP-1000, and requires the addition
of an optional Expansion Module (model MOD-BOOST).
INDOOR REMOTES:
A three-function Indoor Remote with Digital Temperature
Display (model
LVS-3TR) is also available.
This additionally enables you to monitor water temperature
from the convenience of your home.