Comtrend Corporation PG-9172PoE - User Manual

Page 1
Quick Install Guide
PG-9172PoE| Powerline Ethernet Adapter with PoE (Power over Ethernet)
Understanding the Powerline Adapter
How to Create a Basic (2 unit) G.hn Powerline Network
Purpose
Recommended
Primary Adapter
Second Adapter
• Connecting a single dedicated
Internet Device
PG-9172
PG-9172
• Bringing wireless to a remote location
PG-9172
PG-9171n
• Connecting a PoE Enabled Device
PG-9172
PG-9172PoE
*NOTE: A G.hn Powerline Network can consist of up to 16 G.hn Powerline Adapters total.
NOTE: The following steps show how to create or add onto a G.hn Powerline Network using a PG-9172PoE. (A
minimum of two G.hn Powerline Adapters are required to create a proper connection.)
 If this is the first time you are setting up a G.hn Powerline Network please continue to Section B.
 If you already have an established G.hn Powerline Network, and are adding an additional adapter please
skip to Section C.
Configuration Button*
(Enables Device Synchronization)
Connection Indicator
Network Indicator
Security Indicator
PoE Indicator
Displays Connection Strength
Displays Network Status
Connection is Secure When Lit
Power over Ethernet is Active
A
Ethernet Port
*
Press for 10 seconds for Factory Reset.

Summary

Understanding the Powerline Adapter

Adapter Indicator Lights

Explains the function of Connection, Network, Security, and PoE indicator lights.

Powerline Adapter Ports

Details the Ethernet port and its connection to the network device.

Creating a New G.hn Network

Initial Power Outlet Connection

Guides on plugging the adapter into the nearest power outlet for optimal performance.

Connecting to Network Device

Describes using an Ethernet cable to connect the adapter to the modem, router, or access point.

Adding Adapter to Existing G.hn Network

Connecting PoE Enabled Device

Details connecting the PG-9172PoE to a PoE device and verifying power and connection.

Pairing Powerline Adapters

Explains the configuration button process for synchronizing adapters and establishing a secure connection.

Expanding Network with More Adapters

Outlines repeating connection and pairing steps to add additional adapters to the network.

Troubleshooting G.hn Network Issues

Connection LED Not Lighting

Advises checking adapter placement, cable connections, and using the config button if the connection LED is off.

Network LED Not Lighting

Suggests verifying the LAN port connection and testing the Ethernet cable if the network LED is off.

Security LED Not Lighting

Explains that the security LED off indicates a non-secure domain, requiring pairing steps for security.

PoE LED Not Lighting

Guides on checking the LAN connection to the PoE device and verifying 802.3af standard support.

Factory Reset Procedure

Details how to reset PG-9172 and PG-9172PoE devices to factory default settings using the reset button.

Comtrend Corporation PG-9172PoE Specifications

General

Manufacturer	Comtrend Corporation
Model	PG-9172PoE
Category	Adapter
Input Voltage	100-240V AC
Weight	200g
Standards Compliance	IEEE 802.3af
Type	Power over Ethernet (PoE) Adapter