15
ENGLISH
Please read carefully and follow the instructions detailed in this manual. Keep the manual for use and future
maintenance. Pay attention to the configuration of the DIP-switches, to the data concerning the performance (see
“Technical Data”).
The CE mark certifies that the trasmitter conforms to the essential health and safety requirements laid down by
European product directives. The CE mark can be identified by the relevant adhesive label applied to the outside of
the product, on which are shown some of the data shown in the following table:
1. GENERAL INFORMATION
2. TABLE OF TECHNICAL DATA AND MARK
R1-CONTROL R6-CONTROL
MX00 AT 01N 0G 00 MX00 AT 02N 0G 00
Power Supply Lithium 3V (CR2032 230mAh) Lithium 3V (CR2032 230mAh)
Frequency 434,15 MHz 434,15 MHz
Channels 1 6
Range in open field 30 mt 30 mt
Max . absorption < 25mA < 25mA
Dimensions 120x52x19 mm 120x52x19 mm
Weight 40g 40g