Comunello R-CONTROL - User Manual

Manuale di istruzioni per l’uso
ISTRUCTION MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
R-CONTROL

Summary

Remote Control Identification and Setup

R1-CONTROL and R6-CONTROL Diagrams

Visual representation of the R1-CONTROL and R6-CONTROL remotes, detailing buttons and DIP-SWITCHES.

Battery Installation

Illustration showing how to open the remote and insert the battery correctly.

General Information and Technical Data

Manual Usage and Safety Notes

Guidance on reading the manual and paying attention to DIP-switches and performance data.

Technical Specifications and CE Mark

Table of technical data for R1/R6 models and explanation of the CE mark.

R1-CONTROL Transmitter Functions

Button Operations (UP, DOWN, STOP)

Explanation of how the UP, DOWN, and STOP buttons control automation.

Programming R1-CONTROL with PROG and DIP-SWITCHES

How to program control units using the PROG button and DIP-SWITCHES for R1-CONTROL.

R6-CONTROL Transmitter Functions

Button Operations (UP, DOWN, STOP)

Explanation of how the UP, DOWN, and STOP buttons control automation.

Channel Selection (SELC Button)

Method to select the radio transmission channel using the SELC button on R6-CONTROL.

Group Programming (SELG Button)

Procedure for programming and selecting channel groups with the SELG button on R6-CONTROL.

Programming R6-CONTROL with PROG and DIP-SWITCHES

How to program control units using the PROG button and DIP-SWITCHES for R6-CONTROL.

Transmitter Programming Procedures

Storing Transmitters (DIP-SWITCH 1)

General procedure for storing a transmitter using DIP-SWITCH 1.

DIP-SWITCH 1: Storing Transmitters on Actuator

Detailed steps to store a transmitter TX1 on a blank actuator using DIP-SWITCH 1.

Adding Additional Transmitters

Steps to add a second transmitter (TX2) to an actuator using a programmed transmitter.

DIP-SWITCH 3: Deleting Stored Transmitters

Procedure to delete all stored transmitters from an actuator.

SHOWIN RADIO Transmitter Operations

DIP-SWITCH 1: Storing Transmitters

Procedure to store a transmitter TX1 on a blank control unit for SHOWIN RADIO.

Adding Additional Transmitters (TX2)

Steps to add a second transmitter (TX2) to a control unit using a stored transmitter.

Switch 3: Deleting Stored Transmitters

Procedure to delete all stored transmitters from a control unit using Switch 3.

MCU RADIO Transmitter Operations

DIP-SWITCH 1: Storing Transmitters

Procedure to store a transmitter TX1 on a blank control unit for MCU RADIO.

Adding Transmitter TX2

Steps to add a second transmitter (TX2) to the MCU RADIO control unit using a previously stored transmitter.

DIP-SWITCH 3: Deleting Stored Transmitters

Procedure to delete all stored transmitters on the MCU RADIO control unit using DIP-SWITCH 3.

Maintenance and Support

Battery Replacement Guidelines

Instructions for replacing the remote control battery, including safety precautions.

Environmental Protection and Disposal

Information on proper disposal of batteries and transmitters due to pollutant elements.

Manufacturers Guarantee Information

Details of the warranty, its coverage, limitations, and conditions for the transmitter.

Regulatory Compliance

EC Declaration of Conformity

Declaration of compliance with EU directives and applicable technical specifications.

Comunello R-CONTROL Specifications

General

Brand	Comunello
Model	R-CONTROL
Category	Transmitter
Language	English