3. Operations
Charging the headset
The built-in battery is rechargeable and please use the
included micro USB cable to charge the headset by
connecting to a USB port of your computer, power bank or
into an USB AC adapter(requires 5VDC).
Turn off the headset before charging, while charging, the
red indicator stays on.
Once fully charged, the blue indicator will light on.
NOTE: Do not attach the charger mid-call. This will cause
the headset to reset, and the call will be sent back to the
phone.
POWER ON
Slide the switch down, the blue indicator will flash once
and you will hear a voice prompt, "Power on".
To Next Page
Loading...