Need help?Do you have a question about the concept 2 BikeErg and is the answer not in the manual?
Adjust saddle height and angle for optimal comfort and effectiveness using levers and wrenches.
Adjust handlebar height and reach position using knobs and levers for a comfortable riding posture.
Begin with short workouts and gradually increase duration and intensity to prevent injury.
Control intensity via damper settings and cadence, and tune resistance using drag factor.
Learn about periodic calibration prompts and how to perform calibration for accurate results.
Follow the schedule for checks after 1, 5, 250 hours of use, daily, and as needed.
Step-by-step guide for cleaning the flywheel opening to maintain performance and safety.
Information on the Concept2 BikeErg limited warranty and how to access detailed warranty terms.
General| Resistance Type | Air |
|---|---|
| Flywheel | Yes |
| Monitor | PM5 |
| Adjustable Saddle | Yes |
| Wireless Connectivity | Bluetooth and ANT+ |
| Crank Arms | 170 mm |
| Drive Mechanism | Belt |
| Seat Adjustment | Vertical and Horizontal |
| Frame Material | Steel |
| Weight Capacity | 300 lbs (136 kg) |
| Power Requirement | 2 D-cell batteries |
| Damper Setting | 1-10 |
| Display Metrics | Pace, watts, Calories |
| Handlebar Adjustment | Vertical |
| Product Weight | 68 lbs (31 kg) |
| Warranty | 2 years |
To Next Page
